| Symptom | Likely Cause | Solution | |---------|--------------|----------| | Night-only alarms | Animal activity (cats, raccoons) | Increase pulse count to 2 (DIP SW1=ON, SW2=OFF) | | Wind alarms | Tree branches or fence movement | Mask PIR zones with tape or reduce PIR pot | | Random alarms | Voltage drop or RF interference | Use shielded cable, verify power |
directly into the main plumbing line immediately after your sediment water filter. Pay close attention to the directional arrows stamped onto the block housing; the arrows must track identically with the direction of the water flow. 3. Connecting the Water Hoses aqmos r2d272 installation new
A pre-installed at the home's main inlet Step-by-Step Hardware Installation | Symptom | Likely Cause | Solution |
Before you open the box, you must understand what the R2D272 is and is not designed to do. Connecting the Water Hoses A pre-installed at the
Connect the armored hoses from the mounting block to the softener. Secure the connections by pushing the BPT pieces onto the inlets and locking them with the red safety pins.
Academic Bass Portal