Kincaid Radio Controlled Clock Instruction Manual ^hot^ Today

Wait for nightfall. Atomic radio signals travel much further and experience less interference during the night. The clock will usually fix itself by 4:00 AM. Care and Maintenance

A: Up to 24 hours. Many clocks sync within 2 hours, but some take a full day to find a clear signal. Do not return the clock as defective until 3 full nights have passed. kincaid radio controlled clock instruction manual

Press to confirm your selection and advance to the next setting. The standard programming sequence for Kincaid clocks is: Wait for nightfall

The second hand ticks twice, pauses, then ticks twice again. Solution: This is the "Low Battery Lope." The clock is saying, "I am starving for voltage but clinging to life." Replace the batteries immediately. Care and Maintenance A: Up to 24 hours

A: No. Kincaid models are tuned to the WWVB (60 kHz) signal from the USA. European clocks use DCF-77 (77.5 kHz). Your clock will run as a standard quartz clock overseas but will not auto-sync.

If you are in an area with poor signal reception, you can set the time manually: How To Setup an Analog Atomic Wall Clock

from computers, televisions, microwaves, wireless routers, and fluorescent lighting.