Fanuc 11m Parameter List ((top)) Jun 2026

Positive (+) Stored Stroke Limit 1 (Machine Coordinate value)

The FANUC 11M is an older, reliable control system. Parameters are grouped by function. Note that "Bit" parameters (0-7) are read right-to-left (e.g., Bit 0 is the rightmost digit). fanuc 11m parameter list

: Velocity, acceleration, and deceleration limits. Positive (+) Stored Stroke Limit 1 (Machine Coordinate

Read all the way through before performing ANY changes! 1. Select “MDI” mode of operation. 2. Flip the “Memory Protect” switch up, Squarespace Fanuc 10, 11, 12, & 15 RS-232 Parameters : Velocity, acceleration, and deceleration limits

| Parameter # | Description | | :--- | :--- | | | Inferred Position Detection . Used for reference point return detection (grid shift). | | 1800 - 1802 | Servo Loop Gain . Adjusts the stiffness of the servo. Standard is usually around 2000-3000. If this is set wrong, the servo will oscillate or alarm. | | 1803 - 1805 | Motor ID Code . Identifies the specific Fanuc servo motor model (e.g., Model 10, Model 20, etc.) connected to the axis. | | 1850 - 1852 | Order 1 Servo Parameter . Often related to velocity loop gain. | | 1890 - 1892 | Order 2 Servo Parameter . Position loop gain constants. |