Zastone — D9000 Programming Software

Press enter; the software will automatically mirror this value into the box. Set CTC/DCS to None . Give the channel a name, such as VHF CALL . Programming a Repeater Channel

Click This pulls the factory default settings and ensures the software is communicating correctly with your hardware. 3. Entering Data You can now fill out the spreadsheet-style interface: Frequency: Enter the RX and TX frequencies. Offset: Set the + or - for repeater shifts. zastone d9000 programming software

You will need a with a Kenwood 2-pin (K1 style) connector (tip: speaker, ring: mic, sleeve: ground). Most generic "Baofeng UV-5R programming cables" work, but you must ensure: Press enter; the software will automatically mirror this

Click the button (represented by an arrow pointing from a computer toward a radio, or found under the Program menu). Confirm that you want to overwrite the data on the device. Programming a Repeater Channel Click This pulls the

Quickly name channels (Alpha Tags) instead of scrolling through menus.

The primary way to program the unit is through the official Zastone Customer Programming Software (CPS).