Cerwin Vega At40 Specs Fix ~upd~ -

10-inch cast aluminum frame (with signature red/orange surround) Midrange: 5-inch cone driver Tweeter: 1-inch micro-cell polymer dome tweeter Frequency Response: 35 Hz – 22 kHz Power Handling: 5W minimum, 125W RMS maximum Sensitivity: 95 dB (1 Watt @ 1 Meter) Nominal Impedance: 6 Ohms Crossover Frequencies: 400 Hz and 3,000 Hz

Unscrew the mounting screws securing the 10-inch woofer to the cabinet. Carefully lift the driver out and label the positive (+) and negative (-) wires before disconnecting them. cerwin vega at40 specs fix

Solder the leads cleanly, clip any excess wire, and use a small dab of hot glue to secure the body of the new capacitor to the board. This prevents vibrations from loosening the solder joints during heavy bass reproduction. Fix 4: Restoring the Tweeter (Ferrofluid Replacement) This prevents vibrations from loosening the solder joints

Wipe away excess fluid and let the components dry for 10 minutes before reassembling. 3. Aging Crossover Capacitors Aging Crossover Capacitors