Stihl 084 Av Service Manual ((install)) Jun 2026

Always install the gaskets and diaphragms in the correct factory sequence. For the metering side, the gasket goes on the carburetor body first, followed by the diaphragm. For the pump side, the diaphragm goes on the body first, followed by the gasket. Factory Baseline Carburetor Settings

Using a torque wrench is mandatory when reassembling a magnesium-case chainsaw like the 084 AV to avoid stripping the soft metal threads. 10.0 Nm (7.4 ft-lbs) Crankcase Screws: 8.0 Nm (5.9 ft-lbs) Flywheel Nut: 40.0 Nm (29.5 ft-lbs) stihl 084 av service manual

Install a pressure tester adapter into the spark plug thread. Pump the crankcase to a pressure of . Always install the gaskets and diaphragms in the

Block the exhaust port and intake boot using sealing plates. stihl 084 av service manual