What do you want to track? (e.g., total volume data logging , relays for valves , etc.)
| Parameter | Specification | | :--- | :--- | | | 5 to 18V DC (min tested at 4.5V) | | Max Current Draw | 15 mA @ 5V DC | | Output Type | 5V TTL Pulse | | Working Flow Rate | 1 to 30 Liters/Minute (L/min) | | Accuracy | ±10% | | Maximum Water Pressure | 1.75 MPa (approx. 253 PSI) | | Output Pulse Formula | Frequency (Hz) = 7.5 × Flow Rate (Q in L/min) ±3% | | Pinout | Red (VCC), Black (GND), Yellow (Signal/Pulse Output) |
The exclusive library models the mechanical inertia of the turbine. When you start the flow, the pulses don't start instantly—they ramp up. This mimics real-world behavior, allowing you to test debouncing algorithms.
: Community-driven collections like the Karan-nevage PROTEUS-LIBRARY often feature these specialized components. Installation Steps
To simulate different flow rates, you must adjust the frequency of the pulse generator. Right-click the PULSE generator, select , and use these parameters based on the formula (