PADEL-LIGHTS : Light pole locations, wiring conduits, and lux distribution curves.
Electro-welded wire mesh (typically 50x50x4mm) must be layered over the areas not enclosed by glass to allow proper ball rebound while ensuring player safety. The Sub-Base and Concrete Slab padel court dwg
| Element | Specification | |---------|----------------| | Play area | 20 m long × 10 m wide | | Wall height | 3 m (glass + mesh) | | Net height | 0.88 m center, 0.92 m sides | | Court surface | artificial turf with sand infill | | Door width | ≥ 0.8 m (min 1 m for access) | | Lighting | 300–500 lux (4–6 posts) | PADEL-LIGHTS : Light pole locations, wiring conduits, and
Typically 50x50x4mm galvanized steel wire mesh. Surface and Markings Lines: 5cm wide lines (typically white or yellow). Surface and Markings Lines: 5cm wide lines (typically
: Use 10 mm or 12 mm tempered safety glass . Detailed sections should show the glass-to-frame fixtures, which must be flush to ensure a predictable ball bounce. Mesh Fencing : Standard weld mesh should have voids between
Electro-welded wire mesh (typically 50x50x4mm) covers the remaining sections of the sidewalls. Your CAD blocks must indicate the precise anchoring points where these frames bolt into the foundation. Concrete Foundation and Drainage
Side profile showing the stepping down of the frame from 4m to 3m.